Call (480) 985-9279

Chrysler

/Chrysler

We Service and Repair All Chrysler Cars

2007 Chrysler PT Cruiser

2021-09-12T22:01:15+00:00

Chrysler PT Cruiser

Mileage
107,963
Service Date
9/9/2021
Services Performed
  • self diag stored P0340 cam position sensor. checked signal and signal cutting out at times. recommend new sensor.
  • Test drove vehicle. Raised on lift and performed vehicle inspection. Filled out vehicle condition report and submitted to service advisor.
  • Uber
  • replaced faulty cam position sensor.
  • Road test vehicle. Check all suspension and steering parts for wear. Check tire pressure and condition. Check riding height. Check alignment of all four wheels. Adjust caster, camber, toe-in, and thrust angle as needed on all four wheels. Center steering wheel and adjust steering angle as needed.
 
Diane L. gave our service a 5 star review on 9/11/2021
2007 Chrysler PT Cruiser 2021-09-12T22:01:15+00:00

2013 Chrysler 200

2021-05-27T22:01:46+00:00

Chrysler 200

Mileage
114,463
Service Date
5/24/2021
Services Performed
  • Added cleaner to power steering system. Road test for power steering operation. Inspect system for leaks. Performed fluid exchange in power steering lines, pump, rack and pinion, and or gear box. Install power steering additive to revitalize seals and Road test vehicle.
  • Competed Inspection on Tablet
  • No noise heard on test drive. Wheels removed and inspected brakes. Pads are in like new condition. Removed all pads, scuffed surfaces and applies stop squeak. Lubes hardware and shims. No lube was installed on pads at time of installation of brake pads/rotors.
 
Denny B. gave our service a 5 star review on 5/26/2021
2013 Chrysler 200 2021-05-27T22:01:46+00:00

2013 Chrysler 200

2021-04-28T22:00:48+00:00

Chrysler 200

Mileage
113,396
Service Date
4/23/2021
Services Performed
  • Raised vehicle on lift. Removed all wheels. Removed caliper mounting brackets and rotors. Cleaned rotor and hub surfaces. Machined rotors on brake lathe. Assembled in reverse order. Test drove to verify proper brake operation.
  • Removed wheels from vehicle. Computer spin balanced all wheels. Installed wheels on vehicle and torqued lug nuts to manufacturer's specifications. Test drove to verify proper operation.
  • replaced drive belt and all pulleys feel ok at this time.
  • Road test vehicle. Check all suspension and steering parts for wear. Check tire pressure and condition. Check riding height. Check alignment of all four wheels. Adjust caster, camber, toe-in, and thrust angle as needed on all four wheels. Center steering wheel and adjust steering angle as needed.
  • Road test vehicle. Change oil and oil filter. Rotate tires as needed. Lubricate chassis as needed. Perform Vehicle inspection. Adjust tire pressure. Fill windshield washer fluid.
  • Test drove vehicle. Raised on lift and performed vehicle inspection. Filled out vehicle condition report and submitted to service advisor.
 
Denny B. gave our service a 5 star review on 4/27/2021
2013 Chrysler 200 2021-04-28T22:00:48+00:00

2006 Chrysler PT Cruiser

2019-08-24T22:02:12+00:00

Chrysler PT Cruiser

Mileage
176,882
Service Date
8/22/2019
Services Performed
  • inspected charging system. battery was shorted. installed battery and charging system is working properly now
  • inspected and found active leak at pressure switch and valve cover gasket. repair those first. small leak from transmission pan gasket
  • Test drove vehicle. Raised on lift and performed vehicle inspection. Filled out vehicle condition report and submitted to service advisor.
  • Remove tires. Install new tires and speed balance.
  • Tire Fee 1
  • Raised vehicle on lift. Removed rear wheels. Disassembled rear brakes. Resurfaced rear drums. Applied brake material conditioner to brake shoes. Lubed backing plate. Installed brake shoes. Installed drum and adjusted shoes. Installed rear tires and torqued to specification. Test drove and verified proper brake operation.
  • removed intake to gain access. removed valve cover and put in cleaner. cleaned all mounting surfaces. replaced spark plugs with anti seize on threads. installed new valve cover gasket and spark plug tube seals. installed new ignition wires with dielectric spray in boots. reassembled intake with new gaskets. repaired vacuum hose to brake booster
  • removed and replaced oil pressure switch. cleaned area and verified repair
  • Inspect hoses and clamps. Add cleaner to coolant and run through engine, radiator, and heater core. Installed coolant flush machine in-line to coolant system. Pulled vacuum on system to remove old coolant. Pushed 3 gallons of new coolant through cooling system. Add conditioner and sealant to system. Check thermostat and electric cooling fan operation. Test drive and verify proper operation of cooling system.
  • Install oil system cleaner. Road test vehicle. Change oil and filter. Add BG MOAto oil system. Rotate tires as needed. Lubricate chassis as needed. Perform Vehicle inspection. Adjust tire pressure. Fill windshield washer fluid. Lubricate latches and hinges.
  • customer declined additional recommendations this visit
 
Carol D. gave our service a 5 star review on 8/23/2019
2006 Chrysler PT Cruiser 2019-08-24T22:02:12+00:00

2013 Chrysler 200

2019-08-02T22:01:34+00:00

Chrysler 200

Mileage
45,805
Service Date
7/31/2019
Services Performed
  • Install oil system cleaner. Road test vehicle. Change oil and filter. Add BG MOAto oil system. Rotate tires as needed. Lubricate chassis as needed. Perform Vehicle inspection. Adjust tire pressure. Fill windshield washer fluid. Lubricate latches and hinges.
  • replaced right side nozzle and verified operation
  • Test drove vehicle. Raised on lift and performed vehicle inspection. Filled out vehicle condition report and submitted to service advisor.
  • Gain access to cabin filter housing. Remove cover and filter. Clean out debris. Apply BG frigi-fresh to new filter and install new filter back in housing.
  • Removed and replaced wiper blades. Verified proper operation
  • Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders if applicable. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean. Test drove to verify proper brake operation.
  • Inspect hoses and clamps. Add cleaner to coolant and run through engine, radiator, and heater core. Installed coolant flush machine in-line to coolant system. Pulled vacuum on system to remove old coolant. Pushed 3 gallons of new coolant through cooling system. Add conditioner and sealant to system. Check thermostat and electric cooling fan operation. Test drive and verify proper operation of cooling system.
  • customer declined additional recommendations this visit
 
Travis N. gave our service a 5 star review on 8/1/2019
2013 Chrysler 200 2019-08-02T22:01:34+00:00