- scanned codes. p2122 set. ses light was not on during test drive. monitored data. all voltages are in spec at this time. unplugged pedal position sensor and pin tested terminals. terminal tension is good. connector is full of dyelectric grease. cleaned out grease and scuffed terminals with tool. unplugged connector x111 on left strut tower. pin tested all terminals. tension is good. scuffed terminals with tool. load tested wiring from pedal connector to connector x111. wiring tested good. plugged in connectors and cleared code. returned to customer. if problem persists pcm may need to be replaced. cleared code. test drove no code reset.
Joann K. gave our service a 5 star review on 6/23/2020